Design Rule Check Report

Design Rule Check Report

Report Written:	Monday, April 14, 2025
Design Path:	C:\Users\joshu\OneDrive\Documents\University Assignments 24-25\Dissertation\Project\Easy PC\Easy PC PPG Design.pcb
Design Title:
Created:	24/02/2025 13:16:22
Last Saved:	14/04/2025 14:10:47
Editing Time:	21255 min
Units:	mm (precision 1)

Results

Pad to Pad Error (P-P) between (366.3 596.2) and (366.3 596.5) on Layer "[Bottom]".
    Error between Component Pad Conn2.29 and Component Pad Conn2.30, Gap is 0.3 needs to be 0.3.
Pad to Pad Error (P-P) between (366.3 596.9) and (366.3 597.2) on Layer "[Bottom]".
    Error between Component Pad Conn2.30 and Component Pad Conn2.31, Gap is 0.3 needs to be 0.3.
Pad to Pad Error (P-P) between (366.3 597.6) and (366.3 597.9) on Layer "[Bottom]".
    Error between Component Pad Conn2.31 and Component Pad Conn2.32, Gap is 0.3 needs to be 0.3.
Dangling Track from (466.1,632.5) to (466.1,631.2) on layer Top Copper
Dangling Track from (468.6,603.3) to (468.6,602.0) on layer Top Copper

Number of errors found : 5

Accepted Errors already in the design

No errors found

Settings

Spacings

Tracks	Yes
Pads and Vias	Yes
Shapes	Yes
Text	Yes
Board	Yes
Drills	Yes
Components	No

Manufacturing

Acid Traps	No
Drill Breakout	No
Drill Backoff	No
Silkscreen Overlap	No
Silkscreen Board Overlap	No
Wires	No
Component Height	No
Component Names	No
Copper Text In Board	No
Mirrored Text	No
Routing Areas	Yes
Min Track Width	No
Neck Length	No
Min Annular Ring	No
Min Paste Size	No
Vias In Pads	No
Unplated Vias	No
Unplated Pads With Inner Tracks	No

Nets

Net Completion	Yes
Dangling Tracks	Yes
Net Track Length Differences	No